1234 North Avenue Luke Lane
South Bend, IN 360001


T-Lon Solutions

SRM Series Stepped Rod Buffer Seal

With over 30 years of application Success, the SRM stepped rod buffer seal is a proven reliable seal for both low and high pressure systems.

The SRM seal is a single-acting filled T-LON® PTFE compound with an o-ring elastomer energizer designed for reciprocating applications. The filled PTFE seal ring is manufactured with an interference fit with the rod and optimum compression with the o-ring energizer. The single-acting seal design must be assembled with the step facing the media to be sealed. The optimized lip profile removes the fluid film during rod extension and allows fluid return during rod retraction. To prevent seal damage during extreme pressure spikes, the stepped profile allows temporary leakage that is sealed by a secondary buffer seal to prevent fluid into the environment.


  • Low seal drag/friction (Minimize energy loss)
  • No Stick-slip (Smooth Operation)
  • Long seal life from T-LON® filled PTFE compounds
  • Available for rods up to 44″ diameter


  • Industrial Hydraulic Cylinders
  • Mobile Hydraulic Cylinders
  • Agriculture Equipment
  • Shock Absorbers
  • Hydraulic hammers

Technical Data:

(1) T-LON® seal compound determines allowable pressure and velocity ranges

  • Velocity: Up to 4 m/s
  • Pressure: Up to 60MPa

(Function of e-gap and T-LON® compound. Max velocity and pressure cannot be used together)

Most Common:

BRONZE FILLED PTFE (“21” or “22”)

  • Highest Extrusion Resistance (Higher bronze content increases extrusion/wear resistance; I.E. larger e-gap allowable)
  • Good sealability


  • Good wear resistance for rods with rougher surface finish
  • More chemical resistant and used in applications when seal could run dry

(2) Loader compound determines temperature and chemical compatibility

Most Common:

NBR SHORE 70 A (“P”)

  • Working Temp. Range -1°C to 110°C (121°C intermittent)
  • Commonly used with greases, aliphatic hydrocarbon mineral and vegetable oils, and various hydraulic fluids


  • Working Temp. Range -45°C to 149°C (204°C steam intermittent)

• Commonly used with water, steam, water/ silicone/ glycol based fluids, and app’s affected by ozone and weathering.

Download Product PDF

Have questions? Our team is ready to help with anything you need. Feel free to reach out.

Contact T-Lon 888.340.TLON